How to use the stainless steel zipper foot to sew the right side of the zipper. Open the hidden zipper. Place the fabric corresponding to the right zipper with the front face up, turn over the right zipper (front face down), and align it with the left side of the fabric. Lower the presser foot so that the right groove of the presser foot presses the zipper teeth (the zipper teeth are turned to the right, perpendicular to the needle plate). Then sew slowly against the left side of the zipper root.

How to use stainless steel zipper foot

1. The right side of the stainless steel zipper. Open the hidden zipper. Place the fabric corresponding to the right zipper with the front face up, turn over the right zipper (front face down), and align it with the left side of the fabric. Lower the presser foot so that the right groove of the presser foot presses the zipper teeth (the zipper teeth are turned to the right, perpendicular to the needle plate). Then sew slowly against the left side of the zipper root.

2. The left side of the stainless steel zipper. Place the fabric corresponding to the left zipper facing up, turn over the left zipper (front down), and align it with the right side of the fabric. Lower the presser foot so that the left groove of the presser foot presses the zipper teeth (the zipper teeth are turned to the left, perpendicular to the needle plate). Then sew slowly against the right side of the zipper root.

Friendly reminder: Invisible zipper is usually used for light and thin fabrics. If you iron the thin fusible lining on the back of the fabric and then install the zipper, the zipper can be installed more flatly.

How to use various presser feet

1. Fully automatic zipper machine for wrinkle presser foot

Purpose: Used for pleating thin cloth with automatic zipper machine material, that is, collecting the lotus leaf.

Method of installing a fully automatic zipper machine:

1. Use a screwdriver to remove the screws.

Fully automatic zipper machine

2. After removing, install the wrinkle presser foot.

The user’s fully automatic zipper machine method:

1. Adjust the pattern selection to “1″;

2. The stitch length of the fully automatic zipper machine can be selected and adjusted to between “2-4″;

3. Please use thin material needle (9-11#).

2. Crimping foot

Uses: used for curling of thinner fabrics such as silk scarves

Presser foot installation method:

1. Rotate the hand wheel forward, raise the needle to a high place, and raise the presser foot.

2. Squeeze the wrench on the presser foot support at the back. Panasonic presser foot.

3. Install the presser foot so that the pin of the presser foot plate is facing the groove of the presser foot handle. Lower the presser foot wrench and the presser foot will be fixed in its position.

3. Overlock presser foot

Purpose: Used to copy out the overstitch stitches that prevent the fabric from fraying, and the stitches wrap the edge of the cloth. Guide the spread fabric by the guide on the presser foot to keep the fabric edge flat.

Presser foot installation method:

Please refer to the installation method of crimping presser foot.

Instructions:

1. Adjust the pattern selection to “5″; (this manual is subject to FY760)

2. Select and adjust the stitch length to between “2-3″;

3. Place the edge of the cloth that needs to be sewn against the guide plate in the middle of the presser foot to sew at a constant speed.

Four, inlaid rope presser foot

Purpose: Use for sewing rope, requiring thin rope. The thick rope can use the zipper foot, that is, the unilateral foot.

Presser foot installation method:

Please refer to the installation method of crimping presser foot.

Instructions:

1. Adjust the pattern selection to “5″ zigzag stitch

2. The stitch length can be used as needed

3. Install the rope.

5. Seam allowance presser foot, appliqué presser foot, thick material straight line sewing, invisible zipper presser foot

Please refer to the installation method of crimping presser foot for the four presser foot installation and removal methods.

Note: When using, please use pattern “1″, that is, straight stitch. Using other patterns will cause needle breakage.

6. 1/4 seam presser foot

Purpose: Fully automatic zipper threading machine uses 1/4 quilting presser foot to easily sew straight line at 1/4 of the material edge of the automatic zipper threading machine. It is used for professional stitching and stitching of the cloth when the zipper machine is fully automatic .

7. Applique automatic zipper embroidering presser foot

Purpose: It can reduce the resistance of the cloth when passing through. It can pass the material easily when the automatic zipper machine sews leather, artificial leather and other materials. It can also be used as a machine foot for embroidering and pressing the automatic zipper. It is convenient to view the thread below. trace.

Eight, thick material straight line sewing presser foot fully automatic zipper machine

Purpose: When it is used, it is to prevent the stitches from skipping when the car clothes encounter uneven places, especially from low to high.

Nine, invisible zipper foot

Purpose: Used for sewing invisible zipper.

10. Blind stitch presser foot

Uses: Used for dark stitch sewing of men’s trousers, commonly known as skewer edges.

Presser foot installation method:

Please refer to the installation method of crimping presser foot.

Instructions:

1. Select pattern “7″.

2. Follow a certain method of stacking.

3. Start sewing. After sewing, the sewing material is as follows. No stitches are visible on the front.