The light control switch of the mask machine consists of an AC servo motor, a rolling rolling, an optical tracking equipment, and a motor control line. Its role is to ensure that the equipment in the process of processing is normal. When the device is running, when the delivery rate is too fast and the light control switch radiation is covered, the device will order to exchange the servo motor to switch and terminate the rotation to the material.

Mask

Computer bag making machines are generally seal -cut and cutting machines are all promoted by the main electrical motor to drive the dish transmission device, and then transmitted to the operator according to the transmission mechanism such as crankshaft connecting rods. The disk without a variable transmission is in the actual operation of the auditorium, and the spindle rotates the main shaft in the direction of clockwise to slow down the equipment operation.

Computer pocket machine

The lift system of the seal -and -cut bag making machine is a rotary shaft with a rack on the machine. There is a crankshaft connecting rod with a parallel noodle tissue in each withhow hub. Composition, the front and rear swing arms are set on the machine, while the back end of the front and rear swing arm development has the axis of the front and rear liters. On both sides of the board.

The horizontal shelf of the bag or sealing equipment is on the upper and lower rising lower axis. When the rotating shaft is operated, the shift is promoted to the front and rear swing arm, and it becomes up and down according to the front and rear rises. Or the sealing equipment is in the upper and lower posture of the machine.