Computer bag making machine is a machine that produces various plastic packaging or other material packaging bags, with a processing range of plastic or other material packaging bags of different sizes, thicknesses, and specifications. Of course, there will also be various problems during the operation process. So today we will give you some common problems and solutions when using bag making machines.

1. What should be done when the cutting knife of a computer bag making machine always cuts continuously?

At this point, it is necessary to check whether the cutting knife is sharp, whether it needs to be reground, and whether the balance between the upper and lower knives is appropriate. The knife slider is used for a long time, as there may be gaps due to wear, which can lead to imbalance of the knife.

2. The spring of the computer bag making machine has broken, what is the reason for it?

One possible reason may be that the self-adhesive strip is not properly attached and curls up into the spring, making it easy for the spring to break. Therefore, it is important to stick the self-adhesive strip properly during operation. There is another reason, which may be due to uneven material or a lump of material being inserted into the rubber roller, causing the spring to break off unevenly.

3. What if the computer bag making machine cuts three or more pieces and the bag size varies in length?

You can place a layer on the thin film back glue roller, so that it can be evenly mixed with other materials.

4. What should I do if there is blockage in the computer bag making machine?

This situation should be due to the bag being too electronic, so a rubber band should be used to attach a small piece of paper to the screw on the knife beam, and the cut tape should also be used to clamp the bag down.

5. Does the computer bag making machine often experience overspeed or shutdown?

The length setting is too short, the host speed is too fast, the color code photoelectric sensitivity is not adjusted properly, and there is interference from the electrostatic muffler. So at this point, it is necessary to adjust to the appropriate length, appropriate speed, and readjust the photoelectric sensitivity of the color code.